드론/멀티콥터
     D_자동차(종류별)
     스케일 악세서리
     바디/액세서리
     타이어,휠/액세서리
     자동차 공통부품
     쇽/쇽파트
     부품리스트(자동차)
     보트/요트
     조종기/액세서리
     엔진/부품
     엔진부품리스트
     머플러,매니폴드/액세서리
     연료,시동용구/액세서리
     모터,변속기/액세서리
     충전기,배터리/액세서리
     오일,접착제,케이블
     나사,너트,와셔,링
     RC공구/셋팅게이지
     캐리어백/케이스/기타
     멀티콥터/헬기/비행기
     부품리스트(헬기)
     철도모형
     카탈로그/책
     헬기키트
     기타부품

현재위치 HOME >>모터,변속기/액세서리 >>전자변속기(브러시리스모터용)

 Havoc Pro SC / Ballistic 550 Short Course System (4.5T TRA)
 상품코드 NV3116
 권장가격 387,000 원
 판매가격 387,000 원
 제조사 NOVAK
 적립금 3,870 원
 
 구매수 재고없음
관련상품


현재 품절된 상품입니다.



HAVOC PRO SC/BALLISTIC 550 SYSTEM FEATURES
Multiple adjustable parameters via on-board programming: Minimum Brake (0-30%), Drag Brake (0-30%), Minimum Drive (0-15%), Timing Level (0-42°), Timing Set Point (19,500-4,000), Dead Band (2-8%), Throttle Curve (Linear/Expo), Brake Curve (Linear/Expo),  Brake Frequency (1.67-13.7 KHz), Brake End Point (10-100%), Drive Frequency (16-7 KHz),  Reverse, Motor Rotation, Voltage Cut-Off, Hall Sensor Test
On-board Hall Sensor Test to easily and quickly verify that the motor's sensors are working properly
NovaBrakes™ provide instantaneous braking under any timing condition
Sensor-based for excellent torque and low-speed driveability
ROAR approved for 4WD Short Course racing
The Havoc Pro SC System – 4.5T  (#3115) includes a free 5mm Mod 1 Hardened Steel Pinion Gear, and the Havoc Pro SC System – 4.5T TRA (#3116) includes a free 5mm 32-Pitch Steel Pinion Gear
User friendly One-Touch programming interface with five colored status LEDs to help personalize the speed control’s settings
Compatible with the entire 540 and 550-sized Novak brushless motor lines
Robust 3-amp BEC for strong and fast steering response under any condition
Highly water-resistant case
Cross-cut ESC heat sink for reduced weight and efficient cooling
Meets RoHS compliance and includes 120-Day Warranty
Designed, assembled and tested by Novak in Irvine, Calif., using globally sourced components
 
REPLACEMENT / OPTIONAL PARTS
#5100-#5114 & #5120-#5123 5mm Mod 1 Hardened Steel Pinion Gears (optional)
#5152-#5127 & #5160-#5161 5mm 32-Pitch Steel Pinion Gears (optional)
#5304 or #5309 Plug-In Input Signal Harness (Mini-JST) (optional/replacement)
#5351-#5353 Brushless Shielded Sensor Harnesses – 4”, 6” & 9”  (replacement/optional)
#5412 550-Sized Brushless Motor Heat Sink (optional)
#5508 14G Brushless Motor & Battery Wire Set
#5512 12G Silicone Power Wire Set: 3 feet Black, Red, and Blue
#5649 Black Cooling Fan 25x25x10mm - 2mm Mini Plug (replacement)
#5731 3.5mm Low-Loss Power Connector – 5 pairs (optional)
#5741 4mm Low-Loss Power Connector – 5 pairs (optional)
#5947 Ballistic 550 Front End Bell and Bearing – 5mm (replacement)
#5948 Ballistic 550 Rotor – 12.3mm (replacement)
#5949 Ballistic 550 Tuning Rotor – 14mm (optional)
#S5425 Brushless 550 Motor Sleeve (replacement)
#S5903 Ballistic Motor Insulator Pack (replacement)
#S5933 Ballistic 550 Motor Hardware Kit (replacement)
#S5942 Ballistic Timing/Sensor Assembly (replacement)
#S5943 Ballistic Bearing Cap/Replacement Steel Rear Bearing (replacement)
#S5944 Ballistic Back End Bell Replacement (replacement)
#S6504-#S6507 Ballistic 550 Wound Stators (replacement/optional)


  이용안내 - 마이쇼핑 - 장바구니 - 신제품리뷰 - 개인정보취급방침 - 자료실 - 고객게시판